NEO-6M GPS Module With Antenna
12,500 Rwf
Description
The NEO-6M GPS module provides high-performance position tracking using signals from the GPS satellites.
It is equipped with a built-in UBlox NEO-6M GPS chip, which offers low power consumption, high accuracy, and fast acquisition.
Many modules include a built-in EEPROM for storing configuration data, enabling quick initialization after power cycling.
It typically comes with a ceramic patch antenna, offering a strong signal reception and stable performance.
Some versions include onboard voltage regulators, allowing the module to operate from various input voltage levels (3.3V to 5V).
Specifications
Receiver
Chipset: UBlox NEO-6M GPS Receiver.
Positioning System: GPS (supports GNSS/GPS satellites).
Sensitivity:
Acquisition: -148 dBm.
Tracking: -161 dBm.
Position Accuracy: Typically within 2.5 meters CEP (Circular Error Probable).
Velocity Accuracy: 0.1 m/s.
Time Accuracy: 30 ns.
Power Requirements
Input Voltage: 3.3V to 5V (depends on the specific module design).
Power Consumption: ~50 mA (average).
Interfaces
Communication: UART (TTL-level serial).
Baud Rate: Default 9600 bps (configurable).
Protocols: NMEA, UBlox binary protocol.
Antenna
Type: Ceramic patch antenna (embedded or external).
Connector: Some versions support external antenna connections via U.FL or SMA connectors.
Gain: Typically 28 dB with LNA (Low Noise Amplifier).
Environmental
Operating Temperature: -40°C to +85°C.
Humidity: Can operate in high-humidity environments.
Physical
Dimensions: 25mm x 35mm (module size varies by manufacturer).
Weight: ~15 grams (varies with antenna).
Add to cart
